Head's Up™ Voltage Monitor
My personal favorite voltage monitor. This monitor gets your attention when it's needed.
$29.95
| 1050_voltage_monitor_-_instructions.pdf |
Flashing Green - Above 15.2V
Steady Green - 12.9V to 15.1V
Steady Amber - 12.7V to 12.8V
Steady Red - 12.1V to 12.6V
Flashing Red - below 12V
Steady Green - 12.9V to 15.1V
Steady Amber - 12.7V to 12.8V
Steady Red - 12.1V to 12.6V
Flashing Red - below 12V
The Heads Up™ Voltage Monitor contains a micro-processor that monitors the output of the charging system and is accurate to within 200 milli-volts. The Heads Up™ Voltage Monitor has a onboard microprocessor that performs a self-test each time voltage is applied. The single, multi-color LED (red-amber-green) visually indicates the state of your motorcycle's battery / charging system. At a glance, you will instantly know whether the voltage is normal or abnormal. Additionally, you will be notified of serious fault conditions by an attention-getting flash of the LED.
Installation on one of our auxiliary shelves is incredibly simple. Seat the bezel in the 1/4" hole and gently push the L.E.D. into the bezel.far enough to snap the bezel legs onto the indicator. Connect the positive lead to a "switched" power supply (one that activates when the bike is running; e.g., tail light) and the negative lead to the negative battery terminal. See full instruction in the document attached above.
Features
• Single Mult-Color LED visual indicator to mount on dash
• Precision microprocessor monitoring
• Automatic self-testing sequence at motorcycle start up
• Auto-dimming - after 8 seconds, LED intensity is dimmed to 50%
• Easy installation - can be mounted virtually anywhere
• Label Included for referencing voltage colors
• Voltage sampling: 50,000 times per second
• Serious fault detection & notification
Installation on one of our auxiliary shelves is incredibly simple. Seat the bezel in the 1/4" hole and gently push the L.E.D. into the bezel.far enough to snap the bezel legs onto the indicator. Connect the positive lead to a "switched" power supply (one that activates when the bike is running; e.g., tail light) and the negative lead to the negative battery terminal. See full instruction in the document attached above.
Features
• Single Mult-Color LED visual indicator to mount on dash
• Precision microprocessor monitoring
• Automatic self-testing sequence at motorcycle start up
• Auto-dimming - after 8 seconds, LED intensity is dimmed to 50%
• Easy installation - can be mounted virtually anywhere
• Label Included for referencing voltage colors
• Voltage sampling: 50,000 times per second
• Serious fault detection & notification