12 O'clock Labs SpeedoDRD

*SpeedoDRD Model S1 is plug & play

• The smallest electronic speedometer/odometer calibration device in the world.
• Saves max speed, which can be recalled to your stock speedometer gauge
• Widest calibration range on the market (ratio based and multiplier/divider capability)
• Built in testing mode to ensure proper installation
• Easier to setup than any other device on the market
• Simple plug-in installation for many vehicles using factory OEM connectors
• Works for any 3 wire Hall Effect Sensor, or 2 wire Ground Switch Sensors
• Works for vehicles which display MPH or KPH
• Ability to convert MPH to KPH, or KPH to MPH
• Ratio based correction in 0.1% steps, up to 99.9% + or -
• Fractional frequency multiplier & divider with 0.1 steps, up to 99.9 + or -
• Weather proof design to protect against the elements
• 18" wiring harness (1.5ft)
• 3 year product replacement warranty
• Made in the USA

Important Note:

We stock the DRD for all Suzuki V-Stroms.  Select SpeedoDRD-S for all V-Stroms except 2014+ DL1000 and 2017+ DL650, Select SpeedoDRD-U for 2014+ DL1000 and 2017+ DL650.

List Price:  $79.95
Our price just $79.99

Click to set custom HTML

Note for International Customers:  Insurance and delivery confirmation is required for this item.  International customers should contact us for shipping quotes using Express Mail.

Speed sensor connection on Gen 1 V-Stroms.

The speedo sensor connection is located on the right side of the bike, above the front cylinder head.  Sit on the floor at the right side of the bike (by the brake pedal) and shine a flashlight up under the front cowl; look up past the radiator hose by the cylinder head by and you'll see a clear 3-wire connector.  (Thanks to Reverend Biker.)

Speed sensor connection on Gen 2 DL650 V-Stroms.

On the 2012 through 2016 DL650 the speedo connector is on the left side of the bike. It is located hanging loose above the sprocket cover and behind the bike frame. This photo shows it raised a bit and resting on a coil,

Installation on 2014+ DL1000 and 2017+ DL650

The 2014+ DL1000 and 2017+ DL650 v-strom do not have a speed sensor plug,
On these models the ABS computer sends a speed signal directly to the gauge cluster through the wire harness, their is no in-line plug for the signal.
We still have a calibration solution for those bikes, it requires installing an in-line connector on the speed signal wire right before it enters into the gauge cluster, and using SpeedoDRD model U1.
We can send you the U1 harness for your SpeedoDRD, no need to buy a new speedoDRD, I just need to know if your have the Green Rectangle SpeedoDRD or the Black Square SpeedoDRD.
Attached is a diagram of how the install would be done.
​