Parts by Type
- Skid Plates >
- Brake Pads and Lines >
- Suspension >
- Electrical Accesories >
Lighting and Safety
- Handlebar Controls and Mirrors >
- Shelves and GPS/Phone Mounts >
- Luggage >
- Exhaust Systems >
- Parts by Bike
Installation Instructions and Videos
V-Strom Parts Instructions
- Mirror Extender Instructions
- Fork Brace Instructions
- Footpeg and Control Lowering Instructions
- Gear Shift Relocation Instructions
- Bolt-on Kickstand Foot Instructions
- Raising and Lowering Links >
- Shelves and GPS Mounts >
- DL1000 Rear Wheel Spacer Instructions
- Vee2 Saddlebag Guard
- Fender Riser 2014+ DL1000
- Retrieving Missing Parts from the Cowling
- Auxiliary Lighting >
- General Electrical and Lighting >
- Brake Lines >
- Kawasaki Versys X300 >
- Yamaha Parts Instructions >
- V-Strom Parts Instructions >
- Shorter/Taller Riders
- Specials and Promotions
- Favorite Projects
- Adventure Motorcycling Links
- Frequently Asked Questions
- Contact Us
KAWASAKI VERSYS X300
Scan down to see all the accessories.
Larger Bolt-on Side Stand Foot
Similar (but smaller, less robust) side stand feet sold elsewhere for $55 to $60.
Super easy 3 minute installation. Just tighten screws until lock washers compress.
0VER THE DASH SHELF
Want a stable platform for your GPS, radar detector, video camera, or radio, etc. It is made of 3/16" thick 5000 series aluminum and mounts securely between the windscreen and subframe using existing hardware. Powder coated matte black to match the bike perfectly. Use with or without up to three optional Ram Balls.
Kawasaki X300 OTD Shelf
OVER THE DASH GPS/PHONE MOUNT
The GPS mounts puts your GPS centerline just under your normal focus point. The result is that your point of focus can quickly move from the road to the GPS and back again and what is ahead remains in your field of vision. This is much safer than a side or handlebar mount.
Both our mounts use a four point attachment for stability and come complete with a 1" ("B") ram ball. You will need a Ram arm (short) and a cradle and ram ball for your GPS.
SOFT SADDLE BAG GUARDS
Protect your valuable soft saddlebags! Avoid this!
This was the maiden trip of my DL1000. A cross country ride and expensive set of saddle bags ruined. If it weren't for duck tape I would have spread socks and T-shirts from Florida to Washington State.
Simple 5 minute installation, all hardware included.
Price: just $74.95
Important note about shipping charges. This set ships for $12 USD within the USA. Additional shipping charges will need to be added for international shipments so contact us first if you are outside the US. We can most likely ship several items in the same box at the $12 charge and will reduce the total shipping charges to the lowest levels and refund the difference.
Front Fender Risers
1.25" (32mm) for the Stock Front Fender
DON'T LET ROCKS AND MUD RUIN THAT EXPENSIVE FRONT FENDER!
Need more room for aggressive off road tires? Concerned about rocks damaging the fender or mud building between the front tire and fender? Then raise your stock fender 1.25" with this kit.
Requires no modification of the fender itself so it can be returned to the stock position later if desired. Just remove the fender and faux plastic fork guards, then bolt on the kit and fender in a higher position.
Caution: Not compatible with all skid pans (e.g., Ricochet). Owner is responsible for checking for adequate clearance with aftermarket equipment installed,
Pre-sale at this time. This item starts shipping on or before March 30, 2018.
HIGH FRONT FENDER KIT
This kit provides a method of mounting a dirt bike or supermoto style fender on the Kawasaki X300. Everything but the fender is included. Acerbis Supermoto and UFO dirt bike fender shown.