- Home
- Parts by Type
- Parts by Bike
-
Installation Instructions and Videos
-
V-Strom Parts Instructions
>
- Mirror Extender Instructions
- Fork Brace Instructions
- DL650, DL100, DL1050 Footpeg and Control Lowering Instructions
- DL650, DL1000, and DL1050 Gear Shift Relocation Instructions
- DL800 Foot Peg and Control Lowering Kit
- Bolt-on Kickstand Foot Instructions
- Raising and Lowering Links >
- Shelves and GPS Mounts >
- DL1000 Rear Wheel Spacer Instructions
- Vee2 Saddlebag Guard
- Fender Riser 2014+ DL1000
- 2012+ DL650Fender Risers
- Retrieving Missing Parts from the Cowling
- Auxiliary Lighting >
- DL800 GIVI Crash Bars
- General Electrical and Lighting >
- Kawasaki Versys X300 >
- Yamaha Parts Instructions >
-
V-Strom Parts Instructions
>
- Shorter/Taller Riders
- Favorite Projects
- Adventure Motorcycling Links
- Frequently Asked Questions
- Contact Us
- Photos
- Specials and Promotions
Note: For 2014+ DL1000s, the spring loaded stock windshield mount can benefit from additional stiffer springs. Not everyone needs them, but if you you think you do see the link. Just put these additional springs around the factory springs to stiffen up the windscreen mounting.
Note: For 2014+ DL1000s, the spring loaded stock windshield mount can benefit from additional stiffer springs. Not everyone needs them, but if you you think you do see the link. Just put these additional springs around the factory springs to stiffen up the windscreen mounting.
Over-the-Dash GPS Mounts
The GPS mounts puts your GPS centerline just under your normal focus point. The result is that your point of focus can quickly move from the road to the GPS and back again and what is ahead remains in your field of vision. This is much safer than a side or handlebar mount.
You will need to supply your own ram ball, Ram arm (short) and a cradle and ram ball for your GPS. Our GPS mounts come threaded for a RAM-B-358U female ram ball (threaded 5/16-24 TPI). The bolt needed is included with the GPS mount. The Ram ball is commonly available (e.g., Amazon, Ebay, online specialty stores).
See notes below for 2012 to 2016 DL650s and 2014+ DL1000s.
$60.00
You will need to supply your own ram ball, Ram arm (short) and a cradle and ram ball for your GPS. Our GPS mounts come threaded for a RAM-B-358U female ram ball (threaded 5/16-24 TPI). The bolt needed is included with the GPS mount. The Ram ball is commonly available (e.g., Amazon, Ebay, online specialty stores).
See notes below for 2012 to 2016 DL650s and 2014+ DL1000s.
$60.00
Click to set custom HTML
Note: For the 2012 to 2016 DL650. The Adventure model stock windscreen and soem after market windscreen (i.e., California Sci) require use of the extra spacers. Not applicable to other models.
Note: For 2014+ DL1000s, the spring loaded stock windshield mount can benefit from additional stiffer springs. Not everyone needs them, but if you you think you do contact us for information and a link.