- Home
- Parts by Type
- Parts by Bike
-
Installation Instructions and Videos
-
V-Strom Parts Instructions
>
- Mirror Extender Instructions
- Fork Brace Instructions
- DL650, DL100, DL1050 Footpeg and Control Lowering Instructions
- DL650, DL1000, and DL1050 Gear Shift Relocation Instructions
- DL800 Foot Peg and Control Lowering Kit
- Bolt-on Kickstand Foot Instructions
- Raising and Lowering Links >
- Shelves and GPS Mounts >
- DL1000 Rear Wheel Spacer Instructions
- Vee2 Saddlebag Guard
- Fender Riser 2014+ DL1000
- 2012+ DL650Fender Risers
- Retrieving Missing Parts from the Cowling
- Auxiliary Lighting >
- DL800 GIVI Crash Bars
- General Electrical and Lighting >
- Kawasaki Versys X300 >
- Yamaha Parts Instructions >
-
V-Strom Parts Instructions
>
- Shorter/Taller Riders
- Favorite Projects
- Adventure Motorcycling Links
- Frequently Asked Questions
- Contact Us
- Photos
- Specials and Promotions
DL650, DL1000, and DL1050
Gear Shifter Relocation/Extension
The gear shift relocation kit is an optional modification of our foot peg and control lowering kit. It can be installed as a retro-fit to existing installations of with the kit for an original installation.
other than configuring the shifter position on the plate (see video below) installation is the same as that for the foot peg and control lowering kit.
other than configuring the shifter position on the plate (see video below) installation is the same as that for the foot peg and control lowering kit.